How to Install a Ghost Immobiliser
Ghost immobilisers are an effective deterrent to car thieves. Combining this device with other security devices and remaining vigilant can help you create an effective defense against the modern, tech savvy thieves.
Ghost immobilisers will shield your vehicle from hotwiring and relay car thefts by having you enter a pin code in order to start the vehicle. It is activated by buttons on your steering wheel or the centre console, making it inaccessible to thieves.
Identifying the Wires
With increasing numbers of vehicles being stolen with no owner's key, it's important to protect your vehicle. While thieves may be able to duplicate your key fob or even steal your vehicle by hacking its system and stealing the vehicle, a ghost immobiliser provides an additional layer of protection by blocking all signals from the key fob, making it impossible to start your vehicle without entering a pin code.
You can install the ghost immobiliser your own, however it is better to have a professional handle the job. A skilled technician will know where to put the unit in, as well as how to connect it to your wiring of your vehicle. Installation can be complex, and it's important that all connections are made properly to avoid damage or malfunctions.
To get the best results, you must be in a well-lit space and wear the appropriate safety equipment. It is also recommended to read the user guide to get familiar with the wiring system. This will assist you in identifying the wires required for the installation and ensure that you have the proper equipment and components to complete the job right.
Once the wiring has been connected, you can connect the battery and check the system to see if it is functioning properly. Also, ensure that the battery's connections are secure to avoid electrical issues. You should also label the CAN L and CAN H wires with labels or tape to be able to keep track of them during the installation process.
The Ghost Immobiliser allows you to put your vehicle in Transport Mode if you want someone else to drive it temporarily such as for valet parking, or when the vehicle requires to be serviced. This allows you to input the code via a service button located on the steering wheel, the centre console or door panels, and then it will enter the PIN mode for changing the code.
Some thieves try to bypass ghost immobilisers using jamming and spoofing devices that block or send fake messages to the system. This can be overcome by investing in advanced anti-jamming technology and regularly monitoring your Ghost Immobiliser for signs of altering the system.
Disconnecting the Battery
The ghost immobiliser, a modern security device, is designed to deter theft of cars. It uses innovative technology to monitor and deactivate the engine when the correct PIN code is entered, thereby stopping the vehicle from being stolen by thieves. The system is highly effective and stealthy. It doesn't have any visible indicators that could discourage criminals. However, there might come an occasion when you have to remove the device to perform maintenance or upgrades, or even to sell your vehicle.
This process requires special tools and expertise as you'll be working with wires, and bypassing factory parts. It is also important to follow the step-by- guideline that are provided by the manufacturer. You should also consult a professional auto electrician or mechanic, particularly if you don't have any prior experience working on vehicles.
After identifying the wires and disconnection after that, you must check the condition of your battery. Check that it's clean and free of any corrosion, and that the connections are secure. If needed, you may want to replace the battery to ensure it is sturdy enough to handle the electrical demands of a security system that is aftermarket.
After you have disconnected the wiring you can then remove the ghost immobiliser. Use wire cutters or strippers to remove the wires, taking care not to damage the wires or their terminals. Make sure you label each wire so that you can reconnect them properly in the future. If the wires are soldered, you can use an instrument that can withstand heat to break the connection. It is also crucial to shield the wires with insulation tape or heat shrink tubing to keep them from short circuits.
Connect the wires back to the identified constant 12V power source. Use a fuse tap if necessary to safeguard the connections by using fuse. Connect the grounding wire to a solid grounding to the chassis of your vehicle.
After reconnecting the wires, restart your vehicle and enter the PIN. Then, you can restart the engine. If the engine does not start, then you have successfully removed the ghost immobiliser.
Making Connections
Ghost immobilisers are an affordable method to increase the security and security of your vehicle. It is connected to the CAN bus system inside your vehicle, capturing signals, and stopping the vehicle from starting until the proper PIN code is entered. This device is virtually impossible to bypass. It's a great option for those who need extra security and peace of mind. When used in conjunction with a Thatcham Approved tracking system, it can also help to lower your insurance premium.
Reviewing and obtaining the wiring diagram of the vehicle model you are considering is crucial in the process of installing. The diagram serves as a guide to identify the wires that are required to make precise connections. Making use of the correct wiring connectors or soldering techniques will ensure that the connection is long-lasting and secure.
The wires that connect the Ghost immobiliser to the CAN bus system have to be identified and connected correctly. Use small labels or tape to label the CAN L and CAN H wires. This will avoid confusion during installation. The locations of these wires will be different in every vehicle, so it is essential to refer to the wiring diagram of your vehicle and online resources when identifying them.
When the correct wires have been connected, the power to the Ghost immobiliser can be restored. It is recommended to test the immobiliser by launching the engine but not entering the PIN code. This will ensure that the immobiliser has been installed correctly and working as intended. It is crucial to test your immobiliser on a regular basis. This will allow you to identify any problems or issues early.
The ghost immobiliser can also be installed quickly and without modifying the wiring in your vehicle. It's also a great choice for those who wish to enhance the security of their vehicles, since it can be utilized together with a Thatcham-approved alarm or tracker, which will notify your phone or tablet when the vehicle is altered.
Mounting the Unit
The Ghost immobiliser is a great deterrent to car thieves, especially when used in conjunction with a GPS tracking system. It uses buttons on the centre console, doors, and steering wheel to create a unique sequence you are able to recognize. This prevents your car from starting. It is also weatherproof and tamper-proof. It also comes with a three-year warranty and is recommended by a variety of insurance companies.
It is important to carefully follow the instructions during the installation process. While some people are able to handle the work by themselves, it's recommended to seek out a professional you have any doubts. Multimeters and wire strippers are vital tools to determine the wiring and create precise connections. You should also buy electrical tape and insulation to protect the connections against damage. ghost 2 immobiliser reviews 's a great idea test your device once the installation is completed to make sure that it functions as intended.
Ghost immobilisers are a fantastic way to secure your vehicle, especially in areas with high crime rates. It wards off key cloning ECU swapping, and other security threats, and it can be paired with an iPhone app for easy management and monitoring. It's popular among vehicle owners who want to protect their investment.
The Ghost II immobiliser is designed in a low-profile, sleek appearance that makes it unnoticeable by thieves. It is connected to the CAN (Controller Area Network) system of your vehicle and prevents the engine from being started unless a PIN code is entered. The PIN code can be generated by pressing a set of buttons on your steering wheel or console, or even your the door. It is also able to be changed at any point. The device is also tamper-proof and has a GPS tracking system to aid police in locating your vehicle in the event of theft. It's an excellent option to protect your car from theft and is Thatcham approved.